FE MONITOUCH V8 SERIES, Ссылка: Дополнительные функции

Страница: 506 / 508

Appendix 2 Error
App2-1
A2
Appendix 2 Error
Additional Errors
The following errors are added.
For details on other error numbers, item numbers, and sub item numbers, refer to the V8 Series
Reference Manual provided separately.
Error No.
*1 Version 5.4.13.0 (system program version 1.560 or earlier)
*2 Version 5.4.14.0 (system program version 1.570 or later)
Error No. Problem Solution
127 MONITOUCH does not support the remote
desktop function. Check whether MONITOUCH is a model on
which the remote desktop function can be used.
If not, remove the setting.
128
*1 A key code is not registered on MONITOUCH. Register the license key code for remote
desktop on the Main Menu screen.
129 The remote desktop program is not registered in
MONITOUCH. Update the V-SFT version and resend the
screen data to MONITOUCH. For data transfer
to a CF card, you need to write the data to the
CF card via the CF card manager.
138 The remote desktop table is not registered. Register the remote desktop table with the
specified number.
139 The setting value for the remote desktop table is
incorrect. Check the remote desktop setting again
(whether an unregistered remote desktop table
number is specified, etc.).
166 The function set for the serial port is duplicated.
The sub item number shows;
0: CN1
1: MJ1
2: MJ2
Specify a unique function (Simulator, etc.) for
each port.
185 (V806 only)
No optional unit is installed. Select [System Setting]
→
[Edit Model
Selection]
→
[Option Unit], check the setting
and then install option unit “DU-10”.
186 (V806 only)
No optional unit is installed. Remove the option unit “DU-10” once and install
it again.
196 The data stored on the CF card is not correct. This error may occur when the data (screen, 3D
part, etc.) storing function is used for a CF card.
Insert a CF card on which data is correctly
stored using the CF card manager.
199 The function set for the USB port is duplicated. Select one of the following setting for the USB B
port and perform data transfer again.
• USB simulator
• PictBridge printer
• Ladder transfer via USB
214
*2 A key code for the remote desktop is not
registered on MONITOUCH. Register the license key code for remote
desktop on the Main Menu screen.
216 A data sheet includes an item that cannot be
printed. Recheck the data sheet screen. Remove the
unusable item.
Error: xxx (xx: xx)
Error number
Item number
Sub item number
Error: 166 (0: x)
Sub item number