FE MONITOUCH V8 SERIES, Ссылка: Дополнительные функции

Страница: 310 / 508

20 MES Interface Function
20-21
20
MES WRITE (F1, F2, F3)
Function: Adding data to the database
This macro is used to add the data set in the [Write] tab window under MES setting No. [F3] to the
database. The data will be added via the V-Server at the location specified in table No. [F2]. The
result will be stored in memory at the return address [F1].
Available memory
: Setting enabled (indirect designation disabled)
: Setting enabled (indirect designation enabled)
Range
Example
• MES WRITE ($u0000, 10, 0)
The above program adds data to the database in the computer specified in network table No. 10.
The data to be added depends on the settings made in MES setting No. 0.
When the data addition is completed normally, the returned value 0 will be stored in memory at
the return address $u0000.
Supplementary information
• With $s514, you can set the execution style of the macro. For more information, refer to the V8
Series Connection Manual.
• The result of the macro execution is stored in memory at $s515.
-40: The [Write] tab window setting is not made in the specified MES setting number, or any
setting error is found.
For information on other error numbers, refer to the V8 Series Connection Manual.
• The returned value will not be placed at the address [F1] immediately. The [F1] address can be
monitored by the event timer macro, etc.
• The primary key for the V-Server must be set for the database table (page 20-36).
Internal Memory
PLC1 - PLC8
Memory
Memory Card Constant
F1
F2
F3
Value
F0
MES WRITE
F1
Return address
Returned value
0: Normally finished
−
1: End in error
F2 0 to 99: Network table number
F3
0 to 255: MES setting number
Network table No. 10
Return address
MES setting No. 0