FE MONITOUCH V8 SERIES, Ссылка: Дополнительные функции

Страница: 244 / 508

18 Network Camera
18-11
18
Basic Authentication Setting
Basic authentication is provided to permit or prohibit access from anonymous users.
The use of basic authentication prohibits access from anonymous users.
1. Open the [Setup] window.
2. In the menu located to the left of the screen, click [Basic Configuration Instructions]
→
[Users].
3. If there is no check mark for the options under [User Settings], basic authentication is required for
the network camera.
4. If basic authentication is not necessary, check [ Enable anonymous viewer login (no user name
or password required)] for [User Settings] and click the [Save] button for confirmation.
* When operating the camera by the switch on the V8 series, check [ Enable anonymous PTZ
control login (no user name or password required)] and click the [Save] button for confirmation.
For more information, refer to “Camera Lens Operation from the V8 Series” (page 18-13).
If basic authentication is not in use, pressing the [Setup] button calls up the dialog as shown in step
3 in “Access from the Computer” page 18-7. Enter the user name and the password as already
registered.
1.
2.
4.
3.
When selecting the use of basic authentication, make the following settings in the V-SFT software:
As shown below, check [ Use basic authentication] and then enter the user ID and the password
as already registered. To see the registered user name and the password, refer to “User Name and
Password Check and Registration” page 18-12.