FE MONITOUCH V8 SERIES, Ссылка: Дополнительные функции

Страница: 141 / 508

13.1 Font Setting
13-2
Differences among Fonts
Bitmap font
([Japanese 32], [Japanese], [English/Western Europe], etc. are included.)
The font data in the 16
×
16 dots or 32
×
32 dots (two-byte characters) are scaled according to the X/Y
enlargement factors and displayed on the screen.
This font type occupies less memory but is not suitable if a smoother-line typeface is required.
Stroke font, Gothic font
The font data is displayed in a specified point size.
Since the font data of each point size is transferred to the MONITOUCH, the required memory capacity
is larger than that of bitmap fonts while the displayed typeface has smoother lines.
In the case of Gothic fonts, depending on the function assigned to the part or item, some limitations,
such as automatic or manual setting for fonts, may apply.
In the case of stroke fonts, there is no limitation that applies depending on the assigned function;
however, there are other limitations and points to be noted. (For more information, refer to “13.2
Stroke Fonts”.)
Windows fonts
No font data is stored in the MONITOUCH but the fonts used on Windows, such as
“Times New Roman” or “Arial”, are used as image data.
For more information, refer to the V8 Series Operation Manual.