FE MONITOUCH V8 SERIES, Ссылка: Дополнительные функции

Страница: 350 / 508

21.2 Operation Log Viewer
21-17
21
Log Viewer Screen
This section explains the log viewer screen.
Screen Configuration
A log viewer screen is displayed as the following.
Item Description
1. Roll-down switch Scrolls the screen down one row to show the previous data.
2. Roll-up switch Scrolls the screen up one row to show the next data.
3. - block switch Scrolls the screen one page to show the previous data.
4. + block switch Scrolls the screen one page to show the next data.
5. Scroll bar
*
Scrolls the screen in the specified direction.
6. Log file change switch (
↑
) When the log data in the SRAM area is displayed:
This switch does not work.
When the log data in the CF card is displayed:
Pressing this switch brings up the next new file.
When the file currently displayed is the newest one, the switch
shifts the screen to the log data in the SRAM area.
7. Log file change switch (
↓
) When the log data in the SRAM area is displayed:
Pressing this switch shifts the screen to the newest log file in the
CF card.
When the log data in the CF card is displayed:
Pressing this switch brings up the next older file.
8. Multi-overlap display switch Brings up the display item setting screen.
For more information, refer to “Display Item Setting Screen” on
page 21-19.
9. Multi-overlap display switch Brings up the display selection setting screen.
For more information, refer to “Display Selection Setting Screen”
on page 21-22.
10. Normal overlap
*
Displays the contents of the selected log data on the overlap.
11. Return switch Returns you to the previously displayed screen.
5. Scroll bar
5. Scroll bar
1. Roll-down switch
2. Roll-up switch
3. - block switch
4. + block switch
7.Log file change
switch (
↓
)
8. Multi-overlap display switch
11. Return switch
10. Normal overlap
6.Log file change
switch (
↑
)
9. Multi-overlap display switch