FE MONITOUCH V8 SERIES, Ссылка: Дополнительные функции

Страница: 335 / 508

21.1 Operation Log Function
21-2
The table below shows the items that can be contained in operation logs and when storage of those
logs takes place.
*1 When using a switch to store operation logs, [ Save an operation log] must be checked in its
[Switch] dialog.
*2 Table data display is not supported.
• Example of conversion to a CSV file
Item Timing of Log Storage
Start At power-on
Transfer At the time of transferring the screen data or the I/F driver
Mode changeover At the time of switching between the RUN screen and the Main Menu screen
Screen changeover At the time of screen change
Language
changeover At the time of language selection
Switch At the press of a switch
∗
1
Data display
update
∗
2
At the time of updating numerical data/character displays in the entry mode
(Write/
↓
/
↑
key)
CF Card Writing
Error At the occurrence of an error during writing into a CF card
* 1,024 words are used in SRAM. The words in use are added and
displayed at [Unit Setting]
→
[SRAM/Clock Setting]
→
[Operation log
storage point].
Log destruction At the time of newly restarting to store log data after clearing the SRAM area
due to the reasons below:
• SRAM data corruption
• Failure to output to CF card
Output Action Momentary, Set, Reset, Alternate,
Momentary W
Function Standard Screen, Overlap Display, Multi-Overlap
Display, Word Operation, Reset, CF Card
Format, CF Card Removal
Entry Delete (sampling only)
Memory Card Card Format, Transfer Card
→
PLC,
Transfer PLC
→
Card
Digital Switch Digital , Digital Switch
−
JPEG File Delete
Security Login/Logout
Default: checked