FE MONITOUCH V8 SERIES, Ссылка: Дополнительные функции

Страница: 48 / 508

2 Global Overlap
2-3
2
Designate
(Internal, External) Internal:
An overlap display can be shown or hidden by pressing a switch placed
on the screen or using a macro command.
External:
An overlap display can be shown or hidden by specifying an overlap
library number in memory. In this case, the display position can also be
specified by an external command.
Info Output Memory Specify the desired memory address.
The overlap library number currently shown on the screen is stored in the
top memory address “n”. When no overlap display is shown, “-1” is stored.
If [Internal] is selected for [Designate], one word of top memory address “n”
is used.
If [External] is selected for [Designate], a maximum of four words from top
memory address “n” is used.(n to n+3)
Overlap Library No. This is valid only when [External] is selected for [Designate].
A memory address of [Info Output Memory] “n + 1” is automatically
allocated.
Specify the overlap library number to be displayed in advance.
Method Details See:
Switch Function: Multi-Overlap Display
→
Show
Function: Overlap Display (OFF)
→
Hide
page
2-5
Macro SET_MOVLP
→
Show
OVLP_SHOW
→
Hide
page
2-5
Method Details See:
Read area
“n + 1” Bits 3 of read area “n + 1”
(1: show, 0: hide)
page
2-6
Command
Memory Command Memory Bit 0
(1: show, 0: hide)
page
2-6
Target library
designation Overlap Library No.
(= Info Output Memory “n + 1”)
Coordinate
designation
This is valid only when [
Coordinate Designation] is
checked.
(= Info Output Memory “n + 2”,
“n + 3”)
Target library
designation Overlap Library No.
(= Info Output Memory “n + 1”)
Coordinate
designation
This is valid only when [
Coordinate Designation] is
checked.
(= Info Output Memory “n + 2”,
“n + 3”)