FDM P 605, Руководство пользователя, Страница: 52 / 181

ventas@fdm.com.pe
fdmsac@gmail.com
whatsapp:959440045
5.6 Lifting instructions 5 Service instructions
5.6 Lifting instructions
1.
Remove the inlet/outlet housings, the frame
hood and the bowl according to the instructions
in
6.1.1 Inlet/outlet and bowl - dismantling on
page 82 .
NOTE
Make sure to remove the cap nut fixing the bowl to
the bowl spindle.
Before lifting the bowl, check that the bowl hood
has been screwed home into the bowl body.
Less than 2 mm of bowl hood threading must
remain above the bowl body edge.
When lifting the bowl, use the compression tool
fastened on the distributor.
2.
Disconnect the motor cables.
3. Tighten the frame hood.
4.
Fit the lifting eyes. The two eyebolts must be
fitted in the holes nearest to the electric motor.
5. Use two endless slings to lift the separator.
Length of each sling: minimum 1,5 metres.
Thread the slings through the lifting eyes and fit
them to the hook of the hoist.
6. Unscrew the foundation bolts.
7.
When lifting and moving the separator, obey
normal safety precautions for lifting large heavy
objects.
Do not lift the separator unless the bowl has
been removed.
8. Remove the lifting eyes afterwards.
G0507121
A<2 mm
G0820621
A Minimum 750 mm distance between lifting eye
and hook. Use a lifting hook with catch.
!
WARN
ING
Crush hazards
Use only the two special lifting eyes (M12) for lifting
the machine. They are to be screwed into the special
threaded holes. Other holes are not dimensioned for
lifting the machine. A falling separator can cause
accidents resulting in serious injury and damage.
NOTE
Separator without bowl: Use lifting slings for WLL
300 kg.
Bowl: Use lifting slings for WLL 100 kg
52
www.fdm.com.pe