FDM P 605, Руководство пользователя, Страница: 43 / 181

ventas@fdm.com.pe
fdmsac@gmail.com
whatsapp:959440045
5 Service instructions 5.3 Check points at Intermediate Service
Fit a new bowl hood seal ring at each
Intermediate Service (IS) if the old ring is
damaged or indented more than 0,5 mm. Fit
a new ring as follows: Press the ring into the
groove with a straight board (1” x 4”), placed
across the ring.
NOTE
If a new ring is too narrow, put it into hot water, 70 -
80 °C for about 5 minutes.
If it is too wide it will recover after drying at 80 - 90 °C
for about 24 hours.
G0071121
Exchange of seal ring in bowl hood.
43
www.fdm.com.pe