FDM P 605, Руководство пользователя, Страница: 134 / 181

ventas@fdm.com.pe
fdmsac@gmail.com
whatsapp:959440045
7.4 Connection list 7 Technical Reference
7.4 Connection list
Alfa Laval ref. 561658 Rev. 1
Connection Description Requirements/limits
No.
201 Inlet for process liquid
- Flow
See 7.11 Performance data, in- and
outlet device on page 150
- Pressure See 7.11 Performance data, in- and
outlet device on page 150
206 Inlet for liquid seal and displacement
liquid.
- Quality requirements:
See 7.7 Water quality on page 145
- Flow, set value: 8 litres/minute
220 Outlet for light phase, clarified liquid
- Counter pressure
See 7.11 Performance data, in- and
outlet device on page 150
- Capacity See 7.11 Performance data, in- and
outlet device on page 150
(221) Outlet for heavy phase Should be possible to drain liquids
by gravity.
222 Outlet for solid phase
- Discharge volume:
See 7.3 Technical Data on page
133 . The outlet after the separator
should be installed in such a way
that you can not fill the frame top
part with sludge. (Guidance of
sludge pump or open outlet)
372 Inlet for discharge liquid.
- Flow, set value:
18 litres/minute
- Quality requirements: See 7.7 Water quality on page 145
373 Inlet for make-up liquid.
- Flow, set value:
0,9 litres per minute
- Quality requirements: See 7.7 Water quality on page 145
- Consumption: 0,9 litres per discharge
377 Outlet for operating liquid. Should be possible to drain liquids
by gravity.
462 Drain of frame top part, lower Should be possible to drain liquids
by gravity.
463 Drain of frame top part, upper. Should be possible to drain liquids
by gravity.
701 Motor for separator
- Allowed frequency variation
± 5%
(momentarily during 5 seconds) ± 10%
134
www.fdm.com.pe