FDM P 605, Руководство пользователя, Страница: 38 / 181

ventas@fdm.com.pe
fdmsac@gmail.com
whatsapp:959440045
5.3 Check points at Intermediate Service 5 Service instructions
5.3 Check points at Intermediate Service
5.3.1 Corrosion
Evidence of corrosion attack should be looked
for and rectified each time the separator is
dismantled. Main bowl parts such as the bowl
body, sliding bowl bottom, bowl hood and lock
ring must be inspected with particular care for
corrosion damage.
!
WARN
ING
Disintegration hazard
Inspect regularly for corrosion damage. Inspect
frequently if the process liquid is corrosive.
Always contact your Alfa Laval representative
if you suspect that the largest depth of the
corrosion damage exceeds 1,0 mm or if cracks
have been found. Do not continue to use the
separator until it has been inspected and given
clearance for operation by Alfa Laval.
Cracks or damage forming a line should be
considered as being particularly hazardous.
G0172111
Main bowl parts to check for corrosion
Non-stainless steel and cast iron parts
Corrosion (rusting) can occur on unprotected
surfaces of non-stainless steel and cast iron.
Frame parts can corrode when exposed to an
aggressive environment.
38
www.fdm.com.pe