FDM P 605 Скачать руководство пользователя страница 131 | Manualshive

Страница: 131 / 181

FDM P 605 Скачать руководство пользователя страница 131

[email protected]

[email protected]
whatsapp:959440045

7

Technical Reference

7.1

Product description

Alfa Laval ref. 589967 Rev. 2

NOTE

The separator is a component operating in an
integrated system including a monitoring system.

If the technical data in the system description does
not agree with the technical data in this instruction
manual, the data in the system description is the valid
one.

Product specification:

881099-06-03/1

Commercial name:

P 605

Application:

Mineral oil

Technical Design:

Purifier (clarifier as option).
Partial discharge
Machine bottom part for belt drive
Intended for marine and land applications.
Colour of finish painting of painted parts according to order.
Quality of painting according to specifications on drawings.
Sealings available in Nitrile.

Operational limits:

Max. Allowed speed 9510 r/minute
Discharge interval: 2 - 60 minutes

Feed temperature: 0 °C to + 100 °C
Maximum allowed density of operating liquid: 1000 kg/m

3

.

Ambient temperature: + 5 °C to + 55 °C
Not to be used for liquids with flashpoint below 60 °C.
Risk for corrosion and erosion have to be investigated in each case.

131

www.fdm.com.pe

«
...
129
130
131
132
133
...
»

Содержание P 605






















































































































































































Отзывы:

Нет отзывов