Section 5 – System Operations
5–15
The top line shows the current time and the field being defined. The INSTANT key will be
used to move between the fields and the CODE key is used to change between AM/PM.
3) Enter the current hour (00 - 12)
4) Press the INSTANT key and enter minutes (00 - 59). To change AM/PM, press the CODE
key.
The CODE key must be depressed at least one time during the set clock procedure. If the key
has not been depressed at least once, you will not be able to exit when you enter the
✴
at the
end of this procedure.
5) Press the INSTANT key and enter the month (01 - 12)
6) Press the INSTANT key and enter the date (01 - 29)
7) Press the INSTANT key and enter the year (00 - 99)
8) Press
✴
to exit
TIME SET EXAMPLE:
Example: Set clock to 11:21 PM, December 21,1992.
# 3
11 INSTANT 21 CODE
INSTANT 12 INSTANT 21 INSTANT 92
✴
The system will automatically determine the day of the week and will adjust for leap year
and daylight savings time if applicable. The system time must be reset if the AC power
and battery have been removed.
Partition Auto Arming By Day
An auto arming schedule must be entered into the system when this function is enabled. To
enter an auto arming schedule proceed as follows:
1) Enter #3 from the keypad. The keypad will display:
(1) clock (2) arm
The clock must be set prior to entering an auto arming schedule.
CURRENT DAY OF WEEK
SU = Sunday
M = Monday
TU = Tuesday
W = Wednesday
TH = Thursday
F = Friday
SA = Saturday
CURRENT ENTRY FIELD
HR = Hour
MIN = Minute
MON = Month
DAY = Day
YR = Year
W
HR
Clock set
10:25p
03/04/92
CURRENT TIME
(Hour:Minute) AM/PM
CURRENT DATE
Month/Day/Year
