FANATEC PODIUM WHEEL BASE DD2, Руководство пользователя

Страница: 18 / 48

18
IMPORTANT:
Use only the cables which are included with your wheel
base! Peripheral devices are not included and sold separately!
5.7 Connections
To connect additional peripheral devices like shifters,
pedals or handbrake to the Podium Wheel Base DD2
there is a row of connector sockets at the rear of the
wheel base:
5.7.1 USB
The USB port is used to connect the Podium Wheel Base DD2 to PC or console.
IMPORTANT:
Use only the included USB cable to avoid damage and/
or malfunction!
5.7.2 SHIFTER1
The SHIFTER1 port is used to connect H-pattern shifters to the Podium Wheel
Base DD2 (e.g. the ClubSport Shifter or the ClubSport Shifter SQ in H-pattern
mode.) Sequential shifters can also be connected to this port. Note: Sequential
shifters connected to this port can be mapped identically to the shifter paddles
at any Fanatec
®
steering wheels by PC driver settings (see chapter ‘PC driver’
of this user manual).
5.7.3 SHIFTER2
The SHIFTER2 port is used to connect sequential shifters to the Podium
Wheel Base DD2 (e.g. the ClubSport Shifter SQ in SQ mode or the ClubSport
Static Shifter Paddles.) Note: Sequential shifters connected to this port can be
mapped identically to the shifter paddles on the ClubSport Steering Wheel F1®
or any other Fanatec
®
steering wheels by PC driver settings (see chapter ‘PC
driver’ of this user manual).
Attention: H-pattern shifters will not work on SHIFTER2 port!