15
Now release the sleeve of the Quick Release mechanism
and turn the locking ring by hand in the counter-clockwise
direction for a tight fit.
Proceed in reverse order to remove the wheel from the
base.
Pull and hold the Quick Release sleeve and carefully push the steering wheel
onto the shaft.
When using the Fanatec ClubSport Quick Release on a Podium Series wheel
base, no bolt is required.
IMPORTANT:
Take care not to use high forces when attaching the
steering wheel. Make sure the locking ring is not tightened when attach-
ing the rim.
ATTENTION:
Do not over-tighten or use any tools to tighten the
locking ring.
Содержание PODIUM WHEEL BASE DD2
Страница 1: ...Manual EN Rev 10...