FANATEC PODIUM WHEEL BASE DD2, Руководство пользователя

Страница: 13 / 48

13
Slide any Fanatec Steering Wheel
with Simplified Quick Release onto
wheel base shaft.
Turn the Simplified Quick Release top-side
down to see the bottom of the clamp ring to
follow next step below.
Push the Fanatec Steering Wheel until the bolt hole
aligns with the hole on the wheel base shaft.
It is recommend to turn the wheel base off before
attaching a steering wheel with Simplified Quick
Release. Centre the Quick Release shaft so the slot
is at the top.
5.5 Attaching a Steering Wheel
5.5.1 Attaching Fanatec Steering Wheels with Simplified Quick Release
Tighten bolt to fix clamp ring mechanism, use only the
Allen key provided with the Fanatec Steering Wheel.
IMPORTANT:
Tighten only by using the short lever
of Allen key!
Use the clamp ring bolt included with the Podium Wheel Base
DD2 package and use the Allen key included with your steering
wheel package.
Note: When a Fanatec steering wheel with
Simplified Quick Release is used on a Podium
Wheel Base, the torque will automatically reduce
to the level of the ClubSport Wheel Base V2.5.
Note:
While doing this, make sure there is no force feed back effect active.
It would be best to turn the wheel base off.