FANATEC PODIUM WHEEL BASE DD2, Руководство пользователя

Страница: 26 / 48

26
In the Pedals
section there is only the one checkbox called ‘Combined pedals’.
Activate this checkbox if the game or software uses only one input (I/O) for
brake and throttle pedal signals (negative signal for brake, positive signal for
throttle). This might solve problems especially with older games.
In the Gear shifts
section there is only one checkbox called ‘Map sequen
-
tial shifter to the shifter paddles’. Usually shifters connected to the SHIFTER2
port are mapped to different inputs (I/Os) than the shifter paddles on Fanatec
®
steering wheels. If you want to change the mapping so that the used inputs for
these shifters are identically mapped as for the Fanatec
®
steering wheel shifter
paddles activate this checkbox.
If you go to the PC driver page ‘Update’ you will see this window:
In this window you can see the following information:
• Currently installed and used PC driver version
•
Current Steering Wheel Firmware
•
Current Wheel Base Motor Firmware
•
Currently installed and used firmware version on the Podium Wheel Base
DD2
•
Quick link to the Fanatec
®
homepage www.fanatec.com
Below the shown information there is the button Update Podium Base
Firmware
. When pressing this button the firmware update process for the
Podium Wheel Base DD2 will begin (see more detailed description in chapter
‘Firmware update procedure’ below in this user manual).