FANATEC PODIUM WHEEL BASE DD2, Руководство пользователя

Страница: 32 / 48

32
6.3.2 SEN (Sensitivity)
SEN range: 90 … 2520 AUTO SEN default: AUTO (1080)
The sensitivity defines the steering angle. If SEN is set to 90 the steering wheel
can only be turned 90° (45° to left and 45° to right side direction from calibrated
centre position). If SEN is set to 1080 the steering wheel can be turned the
maximum lock of 2520° (1260° to left and 1260° to right side direction from
calibrated centre position). If SEN is set to AUTO the sensitivity is controlled
by the PC driver (see chapter PC driver for more details) or games can directly
support this feature.
6.3.3 FF (Force Feedback)
FF range: OFF 001 … 100 FF default: 035
The Force Feedback defines the maximum strength of the motor when force
feedback effects from software / games are sent to the Podium Wheel Base
DD2. If FF is set to OFF, there will be no force feedback effect executed by the
Podium Wheel Base DD2 motor. If FF is set to 001, the motor will execute only
1% of the maximum motor power. If FF is set to 100, the motor will execute
100% of the maximum motor power.
6.3.4 LIN (FFB Linearity)
LIN range: OFF/ON
FFB Linearity reduces maximum FFB output by a small amount to guarantee a
consistent output between peaks and holding forces as well as improved gen-
eral linearity between game output and torque output.
6.3.5 NDP (Natural Damper)
NDP range: OFF … 100 NDP default: 050
The natural damper will give you an additional damper which you can adjust
from OFF to 100. At 100 you will have the strongest dampening effect which
reacts to the acceleration and angle of your steering. If you turn it OFF, your
steering will have no additional damping, making it easier to turn the wheel.
The Natural Damper is a useful setting to reduce unwanted wheel oscillation.
Oscillation is typically caused by latency in the feedback loop, and is more
apparent in racing games that are not optimised for high-torque motors. The
default value of 50 is a good balance between steering responsiveness and
oscillation mitigation.