FANATEC PODIUM WHEEL BASE DD2, Руководство пользователя

Страница: 27 / 48

27
6.1.2 Firmware update procedure
To initiate the firmware update the Podium Wheel Base DD2 first has to be
connected to the PC by USB cable and then it has to be switched to Bootloader
mode. You can switch to Bootloader mode in two different ways:
•
by PC driver, on page ‘Update’ press the button
Update Podium Base
Firmware
when the Podium Wheel Base DD2 is switched ON, see
previous chapter ‘PC driver’
•
by pressing the ON/OFF button “
” on the back plate of the Podium
Wheel Base DD2 for about 8 seconds when the Podium Wheel Base
DD2 is switched OFF.
When the Bootloader mode is active the
LED of the ON/OFF button “
” will be
flashing. The cooling fan will also switch
off. On the PC screen this window will
appear automatically (shown right).
ON/OFF button “
”