FANATEC PODIUM WHEEL BASE DD2, Руководство пользователя

Страница: 30 / 48

30
IMPORTANT:
Software measures protect the product from installation
of wrong firmwares on the device. Do not try to force install any firmware.
IMPORTANT:
After firmware update the centre position of the Podi
-
um Wheel Base DD2 has to be manually calibrated again. This is also
indicated by the OLED display of the steering wheel showing ‘CAL’. This
message will disappear after manual calibration of the wheel centre. See
chapter ‘Hotkeys’ ‘Wheel centre calibration’ for more details.
IMPORTANT:
After firmware update the H-pattern shifters connected
to the Podium Wheel Base DD2 has to be manually calibrated again. See
chapter ‘Hotkeys’ ‘Shifter calibration mode’ for more details.
6.2 Start-Up procedure
ATTENTION:
When initialisation and auto calibration of the Podium
Wheel Base DD2 is in progress never touch the attached steering wheel
in order to avoid injuries or incorrect calibration!
• Step 1:
Press the ON/OFF button “
” at the
back plate of the Podium Wheel Base DD2,
marked in the picture on the right hand side:
• Step 2:
The fans start working, the LED in the
ON/OFF Button “
” lights up.
• Step 3: The Podium Wheel Base DD1 will rotate the rim to a certain
position, and then rotate back to centre.
• Step 4:
The currently installed firmware version is briefly displayed on the
OLED of the Fanatec® steering wheel.