FANATEC PODIUM WHEEL BASE DD2, Руководство пользователя

Страница: 41 / 48

41
Put the H-pattern shifter’s lever into the position shown on the OLED display
and acknowledge each single position by pressing the FunkySwitch
TM
to get
to the next one.
The following pictures show the instructions on the OLED display of the Club
-
Sport Steering Wheel F1® but are similar on the other Fanatec
® steering
wheels:
. . . . . . . . . . . . . neutral position
. . . . . . . . . . . . . . . . . . . . . . . rear
. . . . . . . . . . . . . . . . . . . . 1
st
gear
. . . . . . . . . . . . . . . . . . . . 2 nd gear
. . . . . . . . . . . . . . . . . . . . 3
rd
gear
. . . . . . . . . . . . . . . . . . . . 4 th gear
. . . . . . . . . . . . . . . . . . . . 5 th gear
. . . . . . . . . . . . . . . . . . . . 6
th
gear
. . . . . . . . . . . . . . . . . . . . 7 th gear
If your shifter has no 7th gear just acknowledge it by pressing the
FunkySwitch TM
when the shifter lever is physically in position of 6th gear. After
all gears are calibrated the OLED display shows SET 1 and the shifter is ready
for use.
NOTE: If you did not intend to enter the shifter calibration mode sim-
ply complete the calibration process either without a connected shifter or
without moving the shifter lever. You may then leave the shifter calibra-
tion mode at the end of the process. This has no impact on the Podium
Wheel Base DD2 original calibration itself and you can go ahead without
a shifter.