FANATEC PODIUM WHEEL BASE DD2 Скачать руководство пользователя страница 45

Страница: 45 / 48

END OF LIFE PRODUCT

RECYCLING

Please follow your local regulations when disposing of this product as e-waste.

FCC COMPLIANCE

This device complies with part 15 of the FCC rules. The operation

of this device is subject to the following two conditions:

•

This device may not cause harmful interference, and must
accept any interference received, including interference that
may cause undesired operation.

•

This device was not modified different than described explicitly in this

user manual.

Note:

This device was tested and approved to the limitations for class B of

digital devices according to part 15 of the FCC rules. This limitations should en

sure an adequate protection against harming interferences in residental areas.
However, a warranty for not-occuring of interferences is not assumed.

Do not modify the device different than described explicitly in this user manual.

Nevertheless, if you do modifications different from the described in this manual

you can be determined to stop the operation of the device.

Imported and distributed by Endor America LLC

8200 Wilshire Blvd. Suite 200 - Beverly Hills CA 90211 - USA

US/CAN: +1 321-655-3524

Email: [email protected]

Website: www.fanatec.com - www.endor.ag

Содержание PODIUM WHEEL BASE DD2

















































Результаты поиска

Содержание PODIUM WHEEL BASE DD2

Отзывы:

Похожие инструкции для PODIUM WHEEL BASE DD2

Бренды по названию

Популярные бренды

FANATEC PODIUM WHEEL BASE DD2, Руководство пользователя

Результаты поиска

Содержание PODIUM WHEEL BASE DD2

Отзывы:

Похожие инструкции для PODIUM WHEEL BASE DD2

Бренды по названию

Популярные бренды