FANATEC PODIUM WHEEL BASE DD2, Руководство пользователя

Страница: 9 / 48

9
ASSEMBLY
5.1 Plan your configuration
To operate the Podium Wheel Base DD2 plug your steering wheel onto the
Quick Release of the Podium Wheel Base DD2 and get started. Connect the
Podium Wheel Base DD2 to your PC by using the USB cable.
Please check the ‘Connections’ chapter to see which kind of peripheral devices
must be connected to which socket on the Podium Wheel Base DD2. All devic-
es have to be connected to the Podium Wheel Base DD2 before powering ON
to allow proper detection and operation.
5.2 Mounting the Podium Wheel Base DD2 using the ClubSport Table
Clamp V2
While it is recommended to hard-mount the Podium Wheel Base DD2 to a ded-
icated cockpit, it is possible to use on a strong flat surface using the Fanatec
ClubSport Table Clamp V2. Just bolt the Podium Wheel Base DD2 to the Table
Clamp with four bolts on the underside of the base.
•
You need to take apart the angled plate by loosening the Allen bolt to
remove the rod.
• Then you can bolt the plate on the Podium Racing Wheel Base but be
careful!
Pay attention to the length regulation on page 10!
• Now insert the rod and tighten it with the Allen bolts.
•
Open the two metal bolts as much as you need to place on the table.
•
Tighten the two metal table clamp bolts. Ensure that the table clamp’s feet
remain well aligned with the bottom of the table plate.
5
5.3 Hard-mounting the Podium Wheel Base DD2
ATTENTION: Not for hard-mounting!
Only for peripheral mounting such as
static shifter paddles or a dash display.
Thread length of holes: 7 mm
Required bolts: M6