User Manual
Page
69
10.5.1 Mix Processing Commands
REPEAT
Take the data within a range and reproduce it at another timecode, for any selection of feeds.
MERGE
Take a section from a selected mix (saved on disk) and place it into the current mix (in memory).
SHIFT
Take the data within a range and shift it to another timecode, for any selection of feeds.
ERASE
Zero the data for a range of timecode, for a selection of feeds.
TRIM
Move all fader levels up or down by a number of dBs, within a timecode range, for a selection of feeds.
COPY
Copy data from one feed to another, within a range of timecode.
SWAP
Swap data between feeds, within a range of timecodes.
10.5.2 Snapshots
In the DATA page, the button titled snapshots gives access to a Snapshot screen
On the Snapshot Screen, up to 64 snapshots can be captured (stored) or loaded (recalled) by stabbing the Capture
button followed by a Snapshot Button, or the Load button followed by a snapshot button.
A Snapshot consists of an instantaneous snap of all of the dynamically automatable parameters of the console:
Faders, Pans, EQ, Auxes, Dynamics, Buss assignments, Insert switching, trim levels, Input phase.
Snapshots may then be recalled either manually in sequence or against Timecode by inserting them into the Cue List.
The automation system must be on line to use the Cue List, and snapshots are recalled for any parameters on any
channels that are in Read. The parameters will hold their snapshot values until the next change of that parameter in
the underlying mix data being read back.
