User Manual
Page
31
3.
Touch a Buss or Group to which you want to assign feeds.
4.
Touch all feeds you want to assign.
5.
Move to the next Buss or Group.
The Channel Configuration screen can also be used for routing. Each destination has a box on the screen which
assigns when you touch it. All busses that have been created are automatically placed on the config screen.
If you assign a channel to more than one buss, equal levels are sent from the channel fader to each assigned buss,
though the Master Fader for each buss will also increase or reduce this level.
The Zoomed Fader screen allows you to assign Feeds to Fader Groups, by touching the square buttons above the
faders.
8.5 Naming Signal Paths
8.5.1 Tracks
Tracks can be named in two places. One of these is on the Editing console, which has a Name Menu for naming clips,
tracks and projects. If you use this menu, the name is also transmitted to the mixing console, and will always appear
on the Electronic Writing Strip (EWS), or any screen display, with the new name.
The other place you can name tracks is on the CHANNEL LIST screen display (under DATA). To change the name,
touch the current name of a track, then use the screen typewriter to spell out a new name. This typewriter includes a
8.4 Buss and Group Assignment
The easiest way to do buss and group assignment is to use the Routing Screen (under DATA), because you can set
the assignment for all channels and busses without changing displays.
To use this screen:
1.
Press
DATA
2.
Press
ROUTING
