Fairlight Prodigy Скачать руководство пользователя страница 2

Страница: 2 / 76

Page

User Manual

Important Notice

The material in this document is copyright to Fairlight ESP Pty Ltd, and

may not be quoted or reproduced in any form without written permission from

the company.

LIMITED SOFTWARE WARRANTY POLICY

All the software provided with, or purchased especially for, Fairlight

products has been tested for functionality. Fairlight ESP Pty Ltd will make its

best efforts to correct reported software defects for future releases subject to

technical practicabilities. Fairlight ESP will also replace any defective media on

which software has been delivered provided that the item to be replaced is

returned to the dealer who supports the product within 90 days of purchase.

Fairlight ESP Pty Ltd makes no warranty or representation either ex-

pressed or implied with respect to the system's performance or fitness for a

particular purpose.

In no event will Fairlight ESP Pty Ltd be liable for direct or indirect dam-

ages arising from any defect in the software or its documentation. Further,

Fairlight ESP Pty Ltd will not accept any liability for any programs, sounds,

audio recording or sequences stored in or used with Fairlight products, including

the cost of recovery of such data.

The warranties, remedies and disclaimers above are exclusive and take

precedence over all others, oral or written, express or implied, to the extent

permitted by law in the geographical area of the product's use. No employee of

Fairlight ESP, agent, distributor or employee of an agent or distributor is author-

ised to offer any variation from this policy.

Fairlight ESP Pty Ltd,

Unit 2, 1 Skyline Place,

French's Forest, NSW 2086,

AUSTRALIA.

Tel61 2 8977 9999

Fax +61 2 8977 9900

Text and Graphics by Andrew Bell / Ross Caston
Updated by Owen Walker

Содержание Prodigy













































































Результаты поиска

Содержание Prodigy

Отзывы:

Похожие инструкции для Prodigy

Бренды по названию

Популярные бренды

Fairlight Prodigy, Руководство пользователя

Результаты поиска

Содержание Prodigy

Отзывы:

Похожие инструкции для Prodigy

Бренды по названию

Популярные бренды