Fairlight Prodigy, Руководство пользователя

Страница: 20 / 76

Page
20
User Manual
“Importing object into project ”, during transfer.
“Title Store Complete.”, on the completion of the transfer.
b) If you select NO, the project will close and the mixer will return to the START UP menu.
Closing a project which contains no mix data will result in:
Message on MFX:
“Store Mixer Data in Project?” (YES / NO)
a) On YES, Mix data is embedded into the project with the Prodigy messaging as 2(a) above.
b) On NO the project will close and will not contain any mixer data.
7.3.6 The UPDATE button on the Mixer.
This button is only available once a title is loaded. Clicking this button will embed the current mix data into the
current project. On clicking the update button it is impossible to activate the following commands, until the
transfer is complete.
1. Project Open – library files
2. Project Close
3. Project Version downgrade
4. Extend
5. Import – Load Mix Data
6i. Clicking UPDATE on the mixer again (possible but ignored)
The Messages displayed during this operation are:
“Updating Mixer Data”, on clicking UPDATE.
“Mixer Data Updated”, on completion of transfer.
7.3.7 Extending Project containing embedded Mixer Data.
On Extending the project, a message box appears:
“Update existing Mixer data before extend?” (YES / NO)
a) On selecting YES the title is updated and then a copy of the title data is embedded into the extended
project.
b)
On NO, the mixer title isn’t updated and a copy of the title data embedded into the original project is
copied and stored into the extended project. Thus the original and the extension both contain un-updated mix
data.
7.3.8 Removing Embedded Mixer Data from a project.
To remove embedded mixer data from the project, go to the PROJ >> NEXT >> NEXT, click the PROJ VER soft
key and select to 15.1 then click ENTER.
Message on MFX:
“WARNING:
This Operation will permanently discard the following:
Embedded Mixer Data” (OK / CANCEL)
a) Selecting OK will downgrade the project version to 15.1 – removing any embedded mixer data stored in
the project. This is signified by the message:
“PROJECT VERSION DOWNGRADED”