User Manual
Page
27
8.3 Channel Configuration
The Channel Configuration screen shows all parameters for a single channel (FEED). It can be accessed using the
appropriate System Mode key, or by double-pressing any channels INT key.
Click here to
make the
channel
immune from
Solo-in-Place.
You may select a feed for configuration:
by pressing the INT button on its fader (double press if the Channel Config page is not currently shown)
by touching the fader (if Assign to CAP via Touch Sensors has been checked on the Preferences screen)
by soloing the fader (if Assign to CAP via Solo Switches has been checked on the Preferences screen)
by pressing the Assign button on the Central Assign Panel and choosing a signal path from the screen
by pressing the Assign button on the screen and choosing a signal path from the new screen that appears
Note: if the Channel Configuration screen is currently displayed, you can make it go away by pressing its System
Mode key, or by double pressing the INT button of the currently displayed FEED.
8.3.1 Live Feeds
Live feeds are channels connecting physical inputs to the digital mixing engine. Before a live feed can be heard, it
must have a physical input patched to it.
8.3.2 Track Feeds
Track feeds are channels connecting the audio from disk recorder playback to the digital mixing engine. When a
track is armed for recording the situation is a little more complex. Like any recorder, Prodigy switches the playback of
armed tracks between input and output depending on the transport state, and this determines which audio signal
comes into the mixer from the track feed.
Sets the send to
Auxes PRE/
POST fader.
Touch here to
assign the feed
to M1 (icons for
the other busses
also appear if
allocated).
Click here to
assign a source
(Physical Input)
for the selected
feed.
Assign Button - Touch here to
select a different feed (can also
be done with the INT button).
Click here to
set up an
Insert Send/
Return for the
feed.
Click here to
assign the feed
to a Control
(VCA Fader)
Group.
Click here to
select a direct
Physical Output
for the feed.
Click to select
Next / Previous
Feed.
Click to change
to Input balance
control (Stereo
Feeds only)
Click here to copy
and paste data
between channels.
Click here to link
and unlink stereo
channels.
Click here to
arm the
audio track.
Click here to move the EQ
and Dynamics into the
input path of a Track
Feed. This allows EQ and
Dynamics to be included
in the signal being
recorded.
