User Manual
Page
47
9.5.3.3
The EQ Screen
9.5.3.4
Presets
At the right of the EQ screen there is a library of saved EQ settings. The buttons below allow you to use and add to
these.
STORE
To store the current EQ setting into the library of presets, first touch an empty box at the right (or an existing one if
you want to replace it), then touch the STORE button. Type a name on the keyboard that appears on the screen, and
touch the ENTER button (double left arrow) on that keyboard.
LOAD
To load an EQ setting from the library into the current selected channel, touch the setting you want to load, then
press the LOAD button.
PREVIEW
Touch an EQ setting and press the PREVIEW button. This will temporarily load the setting into the current selected
channel, and you will hear the result.
UNDO
Press the UNDO button to return to the EQ setting you had before the preview.
CLOSE
Press this button to close the EQ screen. You can also do this by pressing the illuminated EQ System Mode key.
Pressing the
EQ
key causes the screen to display a graph of the current EQ setting.
This changes as you turn pots on the CAP equaliser
9.5.3.2
Sweep Enable
To make dynamic EQ more flexible, press the Sweep Enable button.
Now the turnover frequency of the HF and LF bands can be swept by holding down the Frequency button and
turning the Gain knob.
The Q-factor of the HM and LM bands can be swept by holding down the Q button and turning the Gain knob.
