Fagor CNC 8060, Руководство по эксплуатации

Страница: 63 / 172

Operating manual (MC).
CNC 8060
CNC 8065
WORKING
WITH OPERATIONS OR
CYCLES
3.
Gene
ra
l concep
ts.
·63·
(R
EF
: 1709)
3.1.7 Associate a multiple machining operation with a canned cycle
At the cycle editor, a multiple machining operation may be associated with the following
cycles:
• Center punching, drilling, deep hole drilling, bore milling, tapping, thread milling,
reaming, boring, boring with spindle orientation.
• Simple rectangular pocket, rectangular pocket with rounding, circular pocket and pre-
emptied circular pocket and 2D profile pocket.
• Rectangular boss and circular boss.
How to select multiple machining.
When the canned cycle takes up the whole screen, the multiple machining operation is super-
imposed on it as shown in the figure. In these cases, while editing the cycle data, the top
window is shifted automatically to show the data.
To associate multiple machining to a cycle, first select and define a
machining cycle from those allowed. Then, without quitting the editing of
the cycle, press the softkey associated with multiple machining and select
one of them.
The next figure shows the drilling cycle (top) with a multiple linear machining operation
associated with it (bottom). To edit the data of the canned cycle or of the multiple machining
operation, select the relevant window using the [FOCUS] key.
FOCUS