manualshive.com logo in svg

Fagor CNC 8060, Руководство по эксплуатации

Поделиться
Скачать
Fagor CNC 8060 Скачать руководство пользователя страница 136

Operating manual (MC).  

CNC 8060
CNC 8065

3.

WORKING 

WITH OPERATIONS OR

 CYCLES

Surface milli

ng.

·136·

(R

EF

: 1709)

 

Roughing parameters:

The roughing operation leaves a finishing stock 

z defined as finishing parameter. The

roughing operation defining parameters are:

Spindle turning direction (icon). 

Programming of M functions. 

Finishing parameters: 

Z

Part surface coordinate.

Zs

Safety plane coordinate.

P

Total depth.

Angle, in degrees, between the surface and the abscissa axis. The turn is carried out on the
defined corner, X,Y point.

Maximum milling pass or width.

The cycle recalculates the pass so that all the passes are identical, with the same value as
or smaller than the one programmed. If programmed with a 0 value, it assumes a value of 3/4
of the diameter of the selected tool.

E

Overshooting distance of the tool off the surface being milled.

Fz

Penetration feedrate.

I

Penetration step.

• If programmed with a positive sign (I+), the cycle recalculates the step so all the

penetrations are identical with the same value as or smaller than the one programmed.

• If programmed with a negative sign (I-), the milling is carried out with the given pass (step)

except the last pass that machines the rest.

In either case, the cycle limits the step to the cutting length assigned to the tool in the tool table.

F

Surface milling feedrate.

S

Spindle speed.

T

Roughing tool.

If programmed T=0, there is no roughing.

D

Tool offset.

Clockwise.

Counterclockwise.

Activating or deactivating the execution of M functions before machining. The cycle allows
editing up to 4 M functions. To execute only some of them, define them first and leave the
rest of the data unprogrammed.
The editor will only show this option if the user has configured the editor to allow
programming M functions.

z

Finishing stock.

Maximum milling pass or width.

The cycle recalculates the pass so that all the passes are identical, with the same value as
or smaller than the one programmed. If programmed with a 0 value, it assumes a value of 3/4
of the diameter of the selected tool.

F

Surface milling feedrate.

S

Spindle speed.

T

Roughing tool.

If programmed T=0, there is no roughing.

D

Tool offset.

Содержание CNC 8060













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды