manualshive.com logo in svg

Fagor CNC 8060, Руководство по эксплуатации

Поделиться
Скачать
Fagor CNC 8060 Скачать руководство пользователя страница 147

Operating manual (MC).  

CNC 8060
CNC 8065

WORKING 

WITH OPERATIONS OR

 CYCLES

3.

Slot milli

ng.

·147·

(R

EF

: 1709)

 

3.22

Slot milling.

The way the roughing and finishing blocks of this cycle are joined will be the one previously
set by the user with the instructions #HSC, G5, G50 or G7. We recommend to use #HSC
or G5 controlling the shape of the corner with the instruction #ROUNDPAR. 

Geometric parameters:

Type of slot milling (icon).

There are 6 possible types.

4 for slot mill each corner of the part.

2 for milling a slot across the part.

Roughing parameters:

The roughing operation leaves the following finishing stocks. Both stocks are defined as
finishing parameters. 

X, Y

Corner where the slot is to be milled.

L, H

Slot dimensions.

The sign indicates the orientation referred to the XY point.

Z

Part surface coordinate.

Zs

Safety plane coordinate.

P

Total depth.

Angle, in degrees, between the slot and the abscissa axis. The turn is carried out on the defined
corner, X,Y point.

Finishing stock on the side walls.

z

Finishing stock at the bottom of the pocket.

Содержание CNC 8060













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды