Fagor CNC 8060, Руководство по эксплуатации

Страница: 57 / 172

Operating manual (MC).
CNC 8060
CNC 8065
WORKING
WITH OPERATIONS OR
CYCLES
3.
Gene
ra
l concep
ts.
·57·
(R
EF
: 1709)
3.1.2 Configuring the cycle editor.
Programming M functions in each operation.
Enable the programming of M functions in the canned cycles, to execute them before each
machining operation. This permits, for example, to execute subroutines associated with M
functions before the various operations.
Being this option active, the editor offers in each operation of the cycle the option to edit up
to 4 M functions. To execute only one of them, define it first and leave the rest of the data
unprogrammed.
Programming the next tool.
Enable the capability to program the next tool (the one that will be executed after the cycle)
in the cycles. When it is a random magazine, it prepares the tool while the cycle is being
executed, hence reducing the machining time.
Programming the part surface approach distance.
Activate the possibility to program the part surface approach distance. This option is
available for the center punching, drilling, threading, reaming and boring cycles.
Select axis configuration.
The "+" softkey shows the softkey to configure some of the options of the
cycles of the editor.
On the cycle screens, the display must be activated in order to see and define
the M function data; otherwise, the data will not be displayed.
On the cycle screens, the display must be activated in order to see and define
the next tool; otherwise, the data will not be displayed.
This option is enabled. The cycles show parameter ·Dp· for
programming the part surface approach distance.
This option is disabled. The cycles assume an approach distance of
1 mm.
Setting an axis configuration for the cycle editor. The defined axis
configuration is only good for making it easier to edit the cycle, because
it shows the data related to coordinates and plans according to the
selected axis configuration.
The canned cycles have no work plane associated with them, they are
executed in the current active work plane.