Fagor CNC 8060, Руководство по эксплуатации

Страница: 55 / 172

CNC 8060
CNC 8065
3
·55·
(R
EF
: 1709)
WORKING WITH OPERATIONS OR
CYCLES
3.1 General concepts.
Select the machining cycles.
The machining cycles of the editor are grouped as follows. When pressing one of these
softkeys, the editor shows the cycle of that group used last. When pressing the same softkey
again, the menu shows all the cycles of the group.
Activating the Teach-in mode.
Configuring the cycle editor.
Accessing the probing cycles.
Z axis machining.
Center punching, drilling, deep hole drilling, bore milling, tapping, thread
milling, reaming, boring, boring with spindle orientation.
Pockets / Bosses.
Simple rectangular pocket, rectangular pocket with rounding, circular
pocket and pre-emptied circular pocket, rectangular boss and circular
boss.
2D/3D profile pockets.
2D profile pocket and 3D profile pocket with islands.
Roughing.
Point-to-point profile milling, free profile milling, surface milling and slot
milling.
Multiple machining.
Points in line, points in arc, points in a rectangular pattern, points in a grid
pattern, points in a random pattern (several points defined by the user).
Multiple machining may be associated with canned cycles so it can be
repeated in several points.
The "+" softkey shows the softkey to activate the teach-in mode that allows
jogging the axes of the machine and entering the actual (real) position of
the axes into the data. See
"3.1.3 Teach-in mode." on page 58.
The "+" softkey shows the softkey to configure some of the options of the
cycles of the editor.
The "+" softkey shows the softkey to access the probing cycles or those
of the lathe mode (if available).