Fagor CNC 8060, Руководство по эксплуатации

Страница: 60 / 172

Operating manual (MC).
CNC 8060
CNC 8065
3.
WORKING
WITH OPERATIONS OR
CYCLES
Gene
ra
l concep
ts.
·60·
(R
EF
: 1709)
Movments in the work planes.
When beginning to execute the cycle, the tool moves in rapid (G0) from the starting plane
(Zi) to the safety plane (Zs).
• If the starting plane is above the safety plane (left figure), it first moves in the plane and
then along the longitudinal axis Z.
• If the starting plane is under the safety plane (right figure), it first moves along the
longitudinal axis and then in the plane.
Then, the tool moves in rapid (G0) to the approach plane and finally at working feedrate to
carry out the machining operation. Once the machining operation has concluded, the tool
returns to the safety plane (Zs). If the cycle has a multiple machining associated to it, the
tool moves along the safety plane (Zs), up to the next point to be machined.
The approach plane permits, as in the case of the figure, a fast approach to the machining
surface when the safety plane (Zs) is far away from the part surface.