Fagor CNC 8060, Руководство по эксплуатации

Страница: 83 / 172

Operating manual (MC).
CNC 8060
CNC 8065
WORKING
WITH OPERATIONS OR
CYCLES
3.
Bori
ng.
·83·
(R
EF
: 1709)
3.9.1 Basic operation.
1 It starts the spindle in the requested direction.
2 Rapid movement (G0), up to the XY point and the safety plane (Zs). Depending on the
starting plane, it first moves in XY and then in Z or vice versa.
3 Rapid movement (G0) up to the approach plane.
4 Penetration at feedrate "F".
5 Dwell "t".
6 Withdrawal.
If it has a multiple machining operation associated with it, it executes the following steps as
often as necessary:
7 Rapid movement (G0) to the next point.
8 Repeats steps 3, 4, 5, 6, 7.
• It withdraws at feedrate "F" to the approach plane (at 1 mm above the
surface "Z") and then in rapid (G0) to the safety plane Zs.
• Spindle stop. It withdraws in rapid (G0) to the safety plane Zs and then
starts the spindle in the direction it was turning.