Fagor CNC 8060, Руководство по эксплуатации

Страница: 67 / 172

Operating manual (MC).
CNC 8060
CNC 8065
WORKING
WITH OPERATIONS OR
CYCLES
3.
Drilli
ng.
·67·
(R
EF
: 1709)
3.3 Drilling.
Geometric parameters:
Machining parameters:
Spindle turning direction (icon).
Programming of M functions.
Next tool.
X, Y Machining point.
Z Part surface coordinate.
Zs Safety plane coordinate.
Dp Part surface approach distance.
The editor will only show this data if the user has configured the editor to allow it. If this option
is not enabled, the cycle assumes an approach distance of 1 mm.
P Total depth.
I Penetration step. The drilling takes place with the given step, except the last step that machines
the rest.
Zr Relief coordinate it returns to, in rapid (G0), after each drilling step.
If it has not reached the "Zr" coordinate, it returns to the approach plane.
F Feedrate.
S Spindle speed.
T Tool.
D Tool offset.
t Dwell at the bottom, in seconds.
Clockwise.
Counterclockwise.
Activating or deactivating the execution of M functions before machining. The cycle allows
editing up to 4 M functions. To execute only some of them, define them first and leave the
rest of the data unprogrammed.
The editor will only show this option if the user has configured the editor to allow
programming M functions.
Activating or deactivating the preparation of the next tool.
The editor will only show this option if the user has configured the editor to allow
programming the next tool.