FAAC A951, Руководство пользователя

Страница: 11 / 66

A951 11 532081 - RevA
tttttt
tttttt
tttt
ttt
tttt tttt
tttttt
tttttt
tttttt
tttttt
A951
FAAC S.p.A. Soc. Unipersonale
Via Calari, 10 - 40069 Zola Predosa BOLOGNA
Italy
Tr
ansla
tion of the original instruc
tions
ENGLISH
 5
Technical data
Power supply voltage 230 V~ 50 Hz
MAX absorbed power 100 W
Absorbed power in standby without accessories 5 W
Use frequency 100%
Ambient operating temperature -10°C +55°C
MAX door weight 100 Kg
Door width min 700 max 1100 mm
Doorpost depth MAX 200 mm
Installation on architrave
Maximum opening angle 110°...120°
Dimensions (LxHxP) 575x60x78 mm
Weight 7 Kg
Sale code
Product name
Identification number
Month/year of prod progressive number
for the month of production
Example:
0117 0001
produced in January 2017 S/N 1
3.6 PRODUCT IDENTIFICATION
The product is identified by the following rating plate :
3.7 TECHNICAL CHARACTERISTICS
The A951 must be installed on the architrave.
In order to move the door, one of the following op-
tional arms must be installed:
- Sliding arm (pull) for doors that open inwards, as
seen from the automation side.
- Articulated arm (push) for doors that open out-
wards, as seen from the automation side.
Depending on the distance between the upper edge of
the door and the architrave, each arm can be fastened
directly to the shaft of the A951 or using spacers, to be
ordered separately.
The application limits are indicated in
 5
and the in-
stallation positions are given in tables
 6
and
 7
.
In order to make installation easier, the A951 is
supplied with hole templates for the configurations
described in this manual.
The template indicates the position of the holes for
mounting the door operator and transmission arm,
with or without the optional extensions. It also
shows the electric cable inlet area to the A951.
By turning it over, the A951 can be used to automate
doors with hinges on either the right or left. This
is because the door operator is equipped with a
transmission shaft on each side and because the
programming display automatically adapts itself to
the direction in which it is mounted.
The A951 is a reversible door operator and is therefore
not fitted with a release device.
The A951 can control a lock to mechanically lock the
door in the closed position.
The A951 is equipped with an electronic anti-crushing
system that is activated when an obstacle is detected
during movement: when closing it reverses direction,
when opening it stops for a few seconds and then
continues to open.