background image

A951 

37 

532081        -  RevA

30

  

Tr

ansla

tion of the original instruc

tions

ENGLISH

7.3  OPERATING MODE

The operating mode is set by the 3-position selector 
switch on the side (

30

) or the KP EVO.

The A951 operating modes are:



 AUTOMATIC

The door opens and closes again after the set pause 
time has elapsed.

  ALWAYS OPEN

The door opens and remains open.

  NIGHT

The door closes and the internal and external sensors 
are disabled.

  MANUAL

The door is free to move and can be moved manually.  
All controls are disabled.   The lock is kept open.



 BI-DIRECTIONAL

The pedestrian transit way opens in both directions; 
the internal and external sensors are enabled.

  EXIT ONLY

The pedestrian transit way opens in only one direction; 
the external sensors are disabled.

  ENTRY ONLY

The pedestrian transit way opens in only one direction; 
the internal sensors are disabled.

100%

 TOTAL

The door opens completely.

%

  PARTIAL

Only selects the master door in the “2 leaves” mode.

  INTERLOCK

See § 10.2.

 11 

Operating mode combinations





100%

%

Positions 1 and 2 of the selector on the side can be con-
figured in the advanced on board programming func-
tion (parameters

 S1

 and 

S2

) or via the KP EVO. 

30

 

shows the factory configuration.

 

POSITION 2

AUTOMATIC



POSITION 1

Содержание A951



































































Отзывы: