![background image](http://html1.mh-extra.com/html/faac/a951/a951_manual_3123421063.webp)
A951
63
532081 - RevA
Tr
ansla
tion of the original instruc
tions
ENGLISH
17. MEMORISING RADIO CONTROL CODES
A951If the A951 is fitted with a Communication board and an XF radio module, it can memorise the following
types of FAAC radio control codes: SLH/SLH LR, LC/RC, DS.
The three types of radio codes can coexist simultaneously.
A maximum of 256 codes can be memorised.
When memorising the codes, keep the radio control approximately one meter from the XF radio module.
The radio controls act as AUTOMATIC OPEN commands
.
17.1 SLH/SLH LR RADIO CONTROLS
MEMORISING THE FIRST RADIO CONTROL
1. Press the + button on the A951 for a couple of
seconds,
rL
flashes on the display to indicate that
the radio control codes learning phase has started.
If you keep the button pressed for more than 5 sec-
onds,
rE
appears on the display to indicate that it is
entering the stored radio code deletion phase! To
prevent deletion, release the + button immediately.
2. Release the + button, the A951 remains in the
learning phase for approximately 10 seconds and
the
rL
symbol on the display becomes steady.
3. Press and hold down buttons P1 and P2 simulta-
neously on the SLH/SLH LR radio control (master
version only). The LED on the radio control
starts to flash.
4. Release both buttons; the LED on the radio control
continues to flash.
5. Make sure that
rL
still appears on the display and
press the button on the radio control that you
wish to memorise (the LED becomes steady); the
A951 exits from the learning phase and displays
the status of the automation.
6. Press the same button that was used in the
previous step twice in succession to complete
the memorisation process. If the procedure
was carried out correctly, the A951 will open the
door, if permitted by the operating mode that
has been set.
MEMORISING OTHER RADIO CONTROLS
1. Press and hold down buttons P1 and P2 simulta-
neously on the SLH/SLH LR radio control that has
already been stored (master version only). The
LED on the radio control starts to flash.
2. Release both buttons; the LED on the radio control
continues to flash.
3. Press and hold down the button that has already
been memorised (the LED becomes steady).
4. Place the remote control that has already been
memorised close to the remote control to be
memorised (keeping the button in the previous
step pressed).
5. Press the button on the radio control to be mem-
orised and make sure that its LED flashes twice
before turning off to indicate that the procedure
was completed successfully.
6. Release all buttons.
7. Press the button used in step 5 twice in succession
to complete the memorisation process for the new
radio control. If the procedure was carried out
correctly, the A951 will open the door, if permitted
by the operating mode that has been set.
Содержание A951
Страница 1: ...A951 EN16005...
Страница 65: ......