![background image](http://html.mh-extra.com/html/lincoln-electric/p223-flux/p223-flux_specifications_1919188001.webp)
P223 FLUX
AWS A5.17-97: F7A4-EM12K and A5.23-97: F8A2-EA1-A2
Publication C5.10.1 12/03
www.lincolnelectric.com
Lincolnweld
®
P223 flux is an industry
standard for spiral pipe welding on
up to X80 grade pipe, especially
where good impact properties are
required. It is also well-suited for
longitudinal seam welding on pipe,
producing a low bead profile with
very straight edges, while minimizing
undercuts. Its fast freezing slag
makes it ideal for even small diame-
ter pipe. In most cases, the slag is
self-peeling. For these same rea-
sons, P223 is an excellent choice for
many two-pass welding applications.
While designed for two-pass welding
applications, P223 is a neutral flux
which is also suitable for use in mul-
tiple pass welding with mild steel
and low alloy electrodes.
ADVANTAGE LINCOLN
• The weld deposits of neutral
P223 flux are extremely resistant
to procedural variations.
• Fast solidification of weld metal
and slag for excellent bead
appearance.
• Low dust levels make handling at
the work station clean and easy.
• Excellent weld profiles with straight
and consistent weld bead edges.
• Fast freezing slag makes P223
suitable for smaller diameter pipe.
• Slag is self-peeling on most appli-
cations.
• Designed to deliver Charpy
V-Notch impact properties that
exceed most line pipe require-
ments.
• Low diffusible hydrogen levels.
• Manufactured under a quality
system certified to ISO 9001.
TYPICAL APPLICATIONS
• Oil and gas line pipe fabrication
through X-80 grades.
• Single pass or multiple pass
welding.
• Single arc or multiple arc (up to
3 arc tandem welding).
• Straight seam or spiral seam
welding.
PRODUCT INFORMATION
• Basicity Index: 1.60
• Particle Size:
+12 Mesh 2% max.
-12/+100 Mesh 96% min.
-100 Mesh 2% max.
• Density: 1.3 g/cm
3
CONFORMANCES
For Mild Steel:
Lincolnweld
®
L- 61
AWS A5.17-97: F7A4-EM12K
ASME SFA-5.17
For Low Alloy Steel:
Lincolnweld
®
L-70
AWS A5.23-97: F8A2-EA1-A2
ASME SFA-5.23
RECOMMENDED ELECTRODES
Single Pass or Two-Pass Welds:
Lincolnweld
®
L-61, AWS EM12K
Lincolnweld
®
L-70, AWS EA1
(intended for applications requiring
robust Charpy impact properties).
Charpy V-Notch
Charpy V-Notch
Charpy V-Notch
Charpy V-Notch
Flux/Wire
ft•lbf (Joules)
ft•lbf (Joules)
ft•lbf (Joules)
ft•lbf (Joules)
Combination
@ 0ºF (-18ºC)
@ -20ºF (-29ºC)
@ -40ºF (-40ºC)
@ -60ºF (-51ºC)
Actual Test Results
75
76
87
45
As-welded
(101)
(103)
(117)
(61)
P223/L-61
Actual Test Results
113
101
99
82
As-welded
(153)
(136)
(134)
(111)
P223/L-70
MECHANICAL PROPERTIES
(1)
–
Two-pass seam weld on 0.688" wall X-65 pipe
AC/AC two-wire tandem arc procedure
(1)
Mechanical property results obtained on single pass or two-pass welds will vary with base plate composition,
welding procedure, heat input, etc. These results are shown only to demonstrate the potential for the products
being used.
Tested on Pipe