1
AS80SR11A
Voice Siren
Installation Instructions
General Introduction
The Voice Siren is a two-way wireless alarm device which functions not only
as a siren, but also a strobe light with voice indicator functions.
Includes the following functions:
* Tamperproof protection
* Green and red flashing strobe light
* Visual and audible alarm indications
* 6 indicating beep sounds for identification
* EEPROM for non-volatile memory facility
* LED for identification, visual command confirmation and battery status
Product Layout
Keys
A. Speaker
E. Tamper Switch
B. Voice Speaker
F. Learning Key
C. Backplate screws
G. Micro USB (Factory use only)
D. Backplate
H. DC Jack
Functions
A. Siren Speaker
Siren Warning 110 dB
B. Voice Speaker
Voice Indicator 90 dB
E. Tamper Jumper Link
A full alarm condition will be enabled when the device is
removed from the wall.
F. Learning Key
Learn and clear ID codes.
G. Micro USB
Update voice messages through the USB cable. (Factory
use only)
H. DC Jack
Socket for connecting DC adapter
Binding
1. Loosen and remove the locking screw from the bottom edge of the unit
counter clockwise.
2. Slide the backplate out of the unit.
Figure 1
Front View
Figure 3
Back View
Figure 2
Under View
Figure 4
Inside View
3. Prepare four 1.5V alkaline batteries. Do not insert them into the unit yet.
4. Log into the Homesys account from a web browser.
