A951
64
532081 - RevA
Tr
ansla
tion of the original instruc
tions
ENGLISH
17.2 LC/RC RADIO CONTROLS
MEMORISING THE FIRST RADIO CONTROL
1. Press the + button on the A951 for a couple of
seconds,
rL
flashes on the display to indicate that
the radio control codes learning phase has started.
If you keep the button pressed for more than 5 sec-
onds,
rE
appears on the display to indicate that it is
entering the stored radio code deletion phase! To
prevent deletion, release the + button immediately.
2. Release the + button, the A951 remains in the
learning phase for approximately 10 seconds and
the
rL
symbol on the display becomes steady.
3. Make sure that
rL
still appears on the display and
press the button on the radio control that you
wish to memorise for a few seconds;
rL
flashes
to confirm that it has been memorised and then
becomes steady for approximately 10 seconds
waiting for additional codes before the display
returns to indicating the automation status.
4. To memorise additional radio controls at a later
stage, repeat this procedure from the beginning
or carry out the remote memorisation procedure.
REMOTE MEMORISATION
Additional radio controls can be memorised remotely,
i.e. without having to use the board directly, by using a
radio control that has already been memorised.
1. In proximity to the A951, press buttons P1 and P2
simultaneously for a couple of seconds on the radio
control that has already been memorised. Release
both buttons and then press the button that has
already been memorised within 5 seconds. The
A951 now remains in the learning phase for ap-
proximately 10 seconds.
2. Press the button on the radio control to be mem-
orised within 10 seconds.
3. Wait 10 seconds to finalise the learning phase
before using the new radio control.
17.3 DS RADIO CONTROLS
1. Set the required ON/OFF combination of the 12 DIP
switches on the DS radio control. Avoid setting all
of them to ON or all of them to OFF.
2. Press the + button on the A951 for a couple of
seconds,
rL
flashes on the display to indicate that
the radio control codes learning phase has started.
If you keep the button pressed for more than 5 sec-
onds,
rE
appears on the display to indicate that it is
entering the stored radio code deletion phase! To
prevent deletion, release the + button immediately.
3. Release the + button, the A951 remains in the
learning phase for approximately 10 seconds and
the
rL
symbol on the display becomes steady.
4. Make sure that
rL
still appears on the display and
press the button on the radio control that you
wish to memorise for a few seconds;
rL
flashes
to confirm that it has been memorised and then
becomes steady for approximately 10 seconds
waiting for additional codes before the display
returns to indicating the automation status.
5. For additional radio controls, use the same ON/
OFF combination for the 12 DIP switches on the
radio control that has been memorised. It is
also possible to store radio controls with different
combinations by repeating the same procedure.
17.4 DELETING RADIO CONTROLS FROM
MEMORY
!
This procedure permanently deletes all stored radio
codes from memory
Press and hold down the + button on the A951. The
following will appear on the display in sequence:
-
rL
flashing
-
rE
flashing quickly
-
rE
steady
When
rE
becomes steady, the radio controls memory
is erased. Release the + button. The A951 indicates
the status of the automation.
Releasing the + button when
rL
or
rE
are flashing
on the display interrupts the radio control deletion
procedure.
Содержание A951
Страница 1: ...A951 EN16005...
Страница 65: ......
