6. Operation
DEPOLOX® Pool Compact
54
EN
6.3.1 “Operation mode” menu
Select in this menu the operation mode.
1 Call up the Home menu.
2 Tap
or
symbole
or tap the symbole and than
Operation mode menu.
3 To switch to “Manual mode,” press the
“Change” button. An additional prompt
appears, i.e. in order to change the opera-
tion mode, you need to confirm the
prompt with “Yes” or “No.”
4 In “Manual mode,” it is possible to switch
the dosing contact on and off manually
via the “ON/OFF” button.
Furthermore, a runtime limitation can be set
for manual dosing (not with positioner).
Dosing is switched off after expiry of this time.
If the running time is set to 00:00, it is inactive
and manual dosing is in continuous mode.
5 In “Automatic mode” it is possible to
switch to the settings level by pressing the
symbol.
6.3.2 “Calibration” menu
In this menu, the measurements are compa-
red in compliance with the prescribed mainte-
nance intervals using calibration solution or
buffer solution or via comparative measure-
ments (chapter 6.6). The date of the last cali-
bration and the calibration value entered are
displayed. Depending on the desired measure-
ment, the corresponding calibration menus
can be selected. The menu can be opened in
via the System menu or via the Measure-
ment menu field.
Calibration -
System menu
1 Call up the Home menu.
2 Tap
the
symbol.
3 Press
Calibration
menu.
4 Tap the desired measurement (e.g. Chlo-
rine).
5 Press calibration selection, see “Calibrat-
6 Carry out sensor calibration as described
in chapter 6.6. See “Example “Chlorine
calibration”” on page 55.
Calibration - Measurement menu field
1 Call up the Home menu.
2 Tap the desired measurement (e.g. Chlo-
rine).
3 Tap
the
symbol.
4 Press calibration selection, see “Calibrat-
5 Carry out sensor calibration as described
in chapter 6.6. See “Example “Chlorine
calibration”” on page 55.
Manual dosing rate chlorine
Chlorine:
0 to 100 %/on/off
pH:
-100 to +100 %/on/off
Conductivity:
0 to 100 %
Running time
Chlor, pH, conductivity:
00:00 to 23:59 h
