Evinrude 30 HORSEPOWER MFE, Руководство оператора

Страница: 23 / 60

21

O
PERATION
SHIFTING AND SPEED CONTROL
Carefully check the function
of all control and engine systems before
leaving the dock. DO NOT shift the out-
board into FORWARD or REVERSE while
it is shut OFF.
Shifting
With engine running, twist the throttle grip to
SLOWEST speed position.
Move the shift lever with a firm, quick motion,
to FORWARD or REVERSE gear.
When shifting from FOR-
WARD to REVERSE or from REVERSE to
FORWARD, pause at NEUTRAL until the
engine is at idle speed and the boat has
slowed.
Speed Control
With the outboard running, twist throttle grip:
• Clockwise to decrease speed; or
• Counterclockwise to increase speed
FUEL ECONOMY
Fuel economy can vary depending on boat
load, hull design, and throttle setting. When
boat reaches top speed, throttle back from
FULL SPEED to a lower throttle setting. You
will save fuel with a minimal loss of speed.
Throttle Friction
Adjust the throttle friction knob to reduce the
effort required to hold a throttle setting.
1. Shift lever 002415M
A
WARNING
Do not operate the outboard in
REVERSE with the tilt/run lever in TILT.
The outboard may tilt out of the water,
resulting in loss of control.
NOTICE
FORWARD REVERSE
1
NOTICE
1. Decrease speed
2. Increase speed
007067
A
WARNING
Tighten knob only enough to hold throt-
tle at a constant engine speed. Overtight-
ening will prevent quick throttle change
in case of emergency.
1. Throttle friction screw 002412
2
1
1