manualshive.com logo in svg

evertz 7847FSEDA Series, Руководство пользователя

Поделиться
Скачать
evertz 7847FSEDA Series Скачать руководство пользователя страница 11

7847FSEDA Series  

Frame Synchronizer and Distribution Amplifier 

 

 

Revision 0.1

 

Page - 1

 

1. 

OVERVIEW 

The 7847FSEDA-3G-F-2 and 7847FSEDA-HD-F-2 are dual path broadcast quality Frame 
Synchronizers and Distribution Amplifiers that support SD, HD and 3G (

[-3G] option

) video formats. 

The 7847FSEDA series supports one coax and one fiber optic input on a per path basis.  Using a 
software selection process, the fiber optic or coax input signal may be utilized for subsequent module 
processing that feeds the program outputs (PGM OUT). Fiber inputs/outputs are supported via 
pluggable Evertz SFP modules (Rx: SFP3R-2, Tx: SFP3T13-2). Coax inputs are supported via HD-
BNCs or DINs ([+DIN] Rear-plate ordering option). Two re-clocked DA outputs of either the Fiber or 
Coax input signal are present on HD-BNC/DIN outputs for connection to external elements like patch 
panels.  Four fully processed fiber outputs and six fully processed coax outputs are presented on a per 
path basis.  
 
The core processing features of the 7847FSEDA include Source Identification (Source ID) tag 
insertion, frame synchronization to external reference with H/V phase adjustment, feature rich video 
adjustment (colour correction, hue/gain/video level adjustments), image enhancement, audio channel 
shuffling, audio and video delay adjustments, 5.1 audio downmix processing and advanced audio & 
video monitoring.  See  Figure  1-1  for a detailed system block diagram illustrating signal flow and 
processing from input to output. 
 
Additional audio processing features available on the 7847FSEDA include IntelliGain

®

 Audio Loudness 

Processing [+IG2], and stereo to 5.1 up-mixing [+UMX2]. See Figure 1-2 for a system level view of the 
7847FSEDA audio processing. 
 
Source ID tags inserted by the 7847FSEDA include extensive information about the video signal and 
its transmission history. The 7847FSEDA supports processing of up to 16 Source ID tags.  Key 
information elements inserted into each Source ID tag include DATE, TIME, BASE LABEL, ALIAS 
LABEL and USER CODE information. 
 
The 7847FSEDA is a dual slot card. A 7800FR or 7800FR-QT can therefore support 14 paths of 
processing within a 3RU form factor. The 7847FSEDA shares a common rear panel with the both 
7815VPDA and  7815IDA series. This allows 7847FSEDA modules to be interchanged with 
7815VPDA or 7815IDA modules for additional video processing capabilities, such as frame 
synchronization, Up/Down/Cross conversion and IP video encoding, without requiring a change to the 
backplane interconnect. 
 
These modules are SNMP capable for remote monitoring, control and configuration purposes using 
VistaLINK

®

 PRO. VistaLINK

®

 PRO control and monitoring is available when modules are used with a 

7800FC in slot 1 of the 7800FR frame.  
 

Summary of 7847FSEDA Series Features: 
 

• 

Dual path Video Processor and Distribution Amplifier 

• 

14x paths of processing in 3RU 

• 

Comprehensive DA functionality with 6x processed coax outputs and 4x processed fiber 
outputs per path 

• 

2x coax outputs of re-clocked fiber or coax inputs per path 

• 

SFP module based fiber inputs (Evertz SFP3R-2) and outputs (Evertz SFP3T13-2) 

• 

HD-BNC or DIN [+DIN] based coax inputs/outputs 

• 

Frame synchronization to reference input with H/V phase adjustment 

Содержание 7847FSEDA Series























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды