EVA MAJOLICA LINE, Инструкция по эксплуатации

Страница: 81 / 90

13. MICRONOVA ELETRONICS WHIT REMOTE CONTROL
80
13.4 What happens in case of …
13.4.1 Pellet ignition failure
If pellets do not ignite, the display shows the alarm message “NO ACC” as shown in
figure 25 .
fig. 25
13.4.2 Power outage
Pr48 = 0
When the power is resumed after an outage, the stove enters the FINAL CLEANING phase and waits until the fume temperature
reaches a value below Pr13
fig. 26
Pr48 = T seconds
After a power outage, one of the following conditions may occur depending on the stove previous status:
previous status outage duration new status
switched off any switched off
ignition < T ignition
pellet loading without pre-load < T pellet loading
pellet loading with pre-load any switching off
waiting for flame < T waiting for flame
working mode < T working mode
burn pot cleaning < T burn pot cleaning
switching off < T switching off
If the power outage duration is longer than T, the stove switches off.