EVA MAJOLICA LINE, Инструкция по эксплуатации

Страница: 55 / 90

54
11. N100 MICRONOVA ELECTRONICS WITH 3-BUTTON LED DISPLAY
11.2.7 Menu M06 – first load
This function is available only when the stove is switched OFF . It allows the Auger tube to be loaded upon the first stove start-up when the
pellet hopper is empty. After selecting menu M6, the message "Premere più" ( figure 18a ) will scroll on the display. Then press P2
(increase). The exhaust blower switches on at the maximum speed and the Auger tube (Auger tube LED on) starts working. They will
switch off once the period of time indicated on the display (
figure 18b ) has elapsed or after pressing P3 button.
figure 18°
figure 18b
11.2.8 Menu M07 – stove status
After entering menu M7 by pressing P3 button, the status of a few parameters with stove in working mode scrolls on the display. The table
below contains an example of the values scrolling on the display together with their meaning.
Displayed status meaning
3.1” Auger tube pellet feeding status
52’ Max. time for ignition phase
Toff Thermostat status
106° Fume temperature
1490 Exhaust blower speed
11.2.9 Menu M08 – technician settings
This menu item is reserved to the stove installer. After entering the password (
figure 19
), P1 (decrease) and P2 (increase) buttons
allow all the stove working parameters to be set.
figure 19
11.2.10 Menù M09 – exit
Select this item by pressing P3 button ( figure 20 ) to exit the menu and go back to the previous status.
figure 20
PRE
USC
CHI
90 “