56
11. N100 MICRONOVA ELECTRONICS WITH 3-BUTTON LED DISPLAY
11.3.3 Fire on
Once fume temperature has reached and exceeded PR13 parameter value, the stove goes into the ignition mode: the message "Fuoco
presente" appears on the display and the ON/OFF LED starts flashing.
During this phase the temperature remains stable for a period of time preset by PR02 parameter.
The exhaust blower speed is set by PR17 parameter, the Auger tube remains on for a period of time set by PR05 parameter (Auger tube
LED flashing) and the ignition plug is off (ignition plug LED off).
(figure 6)
Any problem during this phase will cause the control board to stop and the stove to go into error state.
figure 6
11.3.4 Working mode
Once fume temperature has reached and exceeded PR13 parameter value, maintaining it for the period of time set by PR02
parameter, the stove enters the normal working mode. The message "Lavoro" appears on the display and the ON/OFF LED is on.
Hold P2 button down to set the heat output and press P1 button to set the room temperature. (
figure 7a
)
If fume temperature reaches the threshold set by PR1 5 parameter, the air exchanger fan will switch on (as the exchanger LED).
figure 7a
During this phase, after a period of time set by PR03 parameter, the stove cleans the burn pot. The message "Pul-braciere" scrolls on the
display, the Auger tube is on (as the relevant LED) at a speed set by PR09 parameter and the exhaust blower at a speed set by PR08
parameter. (
figure 7b
)
Once the period of time set by PR12 parameter has elapsed, the stove goes back to the working mode.
figure 7b
11.3.5 Changing set heat output
During stove normal operation (“Lavoro” – working mode), the heat output can be changed by using P2 button (Heat output setting
LED on).
Press P2 button again to increase the heat output and P1 button to decrease it. The display will show the set heat output.
(figure 8)
Do not press any button for 5 seconds or press P3 button to exit the setting mode.
figure 8
FUO
LAV
PUL-
Pot3
Содержание MAJOLICA LINE
