EVA MAJOLICA LINE, Инструкция по эксплуатации

Страница: 59 / 90

58
11. N100 MICRONOVA ELECTRONICS WITH 3-BUTTON LED DISPLAY
When fume temperature reaches the threshold set by PR13 parameter, the stove goes into the Stand-by mode and the message
"Stop eco temp good" scrolls on the display.
The Auger tube (Auger tube LED off), the exchanger (exchanger LED off) and the exhaust blower are off.
(figure 11c)
figure 11c
If room temperature falls below the set value (Set room temperature value) plus the threshold set by PR43 parameter, the stove switches
back on.
11.3.9 Stove switching off
Hold P3 button down to switch off the stove. The display shows the message "Pul-Finale”. (figure 12a)
The Auger tube motor switches off (Auger tube LED off), the exhaust blower speed is set by PR08 parameter and the ON/OFF LED
flashes.
figure 12a
The exchanger blower remains on (exchanger LED on) until the fume temperature falls below the value set by PR1 5 parameter. If, at the
end of the period of time set by PR39 parameter, the fume temperature remains below the threshold set by PR1 0 parameter, the stove
will switch off and the message "Off" appears on the display.
(figure 12b)
figure 12b
STO
PUL-
OFF